CDM-VW300 2-Channel Dynamic Vibrating-Wire Analyzer The CDM-VW300 is a 2-channel interface between sensors and dataloggers that allows shorter intervals between measurements. This interface uses an excitation mechanism that maintains the vibrating-wire sensor in a continuously vibrating state. The interface measures the resonant frequency of the wire between excitations using the patented vibrating-wire spectral-analysis technolgy (VSPECT™). VSPECT provides very fine measurement resolution and also limits the influence of external noise by discriminating between signal and noise based on frequency content. Because of this technology, the signal can be carried through longer cables, giving flexibility in sensor and datalogger siting. The CDM-VW300 interfaces with standard vibrating-wire sensors, giving much faster and better measurements without having to purchase new sensors. The analyzer allows high data rates, and multiple CDM-VW300 modules can be connected to one datalogger. Click link sau để xem chi tiết <http://doluongdieukhien.com/cdm-vw300-2-channel-dynamic-vibrating-wire-analyzer-6737652.html> Nguyen Van Hung Measurement and Control Equipment Co., Ltd(MC&TT Co., Ltd) Add: No 847 Huyen Ky, Phu Lam, Ha Dong Dist, Ha Noi, Vietnam Branch: CL37, Nam La Khe Urban Areas,La Khe Ward, Ha Dong Dist, Hanoi, Vietnam Mobile: +84 904 251 826 Tel: +84-4-85894254 Web: <http://doluongdieukhien.com/> Skype/Yahoo: nvhung.mctt Email: nvhung@mctt.com.vn <mailto:nvhung@mctt.com.vn>